Light guide film wholesale
Because of the ultra-thin thickness of the light guide film, it will not affect the hand feel during normal use. In addition, the product also has the characteristics of uniform light emission and many color changes. The product is mainly used in mobile phones and remote control buttons, which can make your buttons rich in color.
The working principle of the light guide film is generally to use the principle of light reflection and refraction, and then combined with the design of special optical software, so that the optical PC film can be microstructured, and then the "point light source" can be expanded into a "surface light source". Generally, the light beam will propagate from the medium at a suitable angle and density, and finally achieve the excellent effect of uniform light output.
The design of LGF light guide film can generally reduce the design of several LED lights, so as to solve the problems of uneven brightness distribution, large power consumption, large space occupation and high cost.
Shading film + LGF + water glue + mylar + spacer + metal dome + protective film
1. Shading film(Black and white fingerprint adhesive
2. LGF
3. 3M7533
4.Mylar
5. Spacer
6. Metal Dome
7. protective film
Product Specification
1.LGF:Common thickness 0.125mm, light transmittance >90%
2.water glue：3M7533
3.Glue material :
project | thickness(mm) | initial force | retentivity(hr/kg*inch) | adhesive force(kgf/inch) |
Detection Tool | thickness gauge | Tape initial viscosity tester | Supplier supply | Supplier supply |
Colour Transparent | thickness of adhesive：0.018~0.025 | The adhesive rolling distance of corresponding steel balls is less than 10cm | 8↑ | 0.6↑ |
base material： 0.025/0.05/0.075/0.1 | ||||
White | thickness of adhesive：0.018~0.025 | The adhesive rolling distance of corresponding steel balls is less than 10cm | 8↑ | 0.6↑ |
base material： 0.025/0.05/0.075/0.1 | ||||
One side is black, the other side is white | thickness of adhesive：0.018~0.025 | The adhesive rolling distance of corresponding steel balls is less than 10cm | 8↑ | 1.1↑ |
base material： 0.025 |
Note: (1) metal DOME substrate: SUS301;(2) vertex: down Dimple
project | positioning hole to positioning hole(mm) | Positioning hole to shape(mm) | Shape to shape(mm) | Hole diameter(mm) | Positioning hole to metal dome(mm) | metal dome to metal dome(mm) |
sample | ||||||
Manual sample | ±0.15 | ±0.15 | ±0.15 | ±0.1 | ±0.2 | ±0.2 |
Mould sample | ±0.1 | ±0.1 | ±0.1 | +0.08/-0 | ±0.12 | ±0.12 |
Note:
(1) the positioning hole are minimum aperture Φ 1.0 mm;
(2) the minimum aperture of SP sheet is 0.15mm larger than that of shrapnel.The width of gas groove of SP sheet is 1.0~1.2mm, and the wiring mode is: two to three keys are connected, and avoid components to avoid dust.
4. The sample delivery
sample
Model | The new model(5~20pcs) | The old model(5~20pcs) |
Manual sample | 3 ~ 5 working days | 3 ~ 5 working days |
Mould sample | 1 working day after the mold returns | 2 ~ 3 working days |
Mold delivery time: 6 - 7 working days
Note:
1. The life test conditions are as follows: the plastic flat head of the hitting head;Diameter: Φ 1.8;Speed: 2~3 times/second;Strike power: 400-500g.
2. Determination of life span: before and after the life span impact, the change rate of elasticity and feel of the DOME is less than 30%, and the metal dome is not broken.
Light guide film wholesale
Because of the ultra-thin thickness of the light guide film, it will not affect the hand feel during normal use. In addition, the product also has the characteristics of uniform light emission and many color changes. The product is mainly used in mobile phones and remote control buttons, which can make your buttons rich in color.
The working principle of the light guide film is generally to use the principle of light reflection and refraction, and then combined with the design of special optical software, so that the optical PC film can be microstructured, and then the "point light source" can be expanded into a "surface light source". Generally, the light beam will propagate from the medium at a suitable angle and density, and finally achieve the excellent effect of uniform light output.
The design of LGF light guide film can generally reduce the design of several LED lights, so as to solve the problems of uneven brightness distribution, large power consumption, large space occupation and high cost.
Shading film + LGF + water glue + mylar + spacer + metal dome + protective film
1. Shading film(Black and white fingerprint adhesive
2. LGF
3. 3M7533
4.Mylar
5. Spacer
6. Metal Dome
7. protective film
Product Specification
1.LGF:Common thickness 0.125mm, light transmittance >90%
2.water glue：3M7533
3.Glue material :
project | thickness(mm) | initial force | retentivity(hr/kg*inch) | adhesive force(kgf/inch) |
Detection Tool | thickness gauge | Tape initial viscosity tester | Supplier supply | Supplier supply |
Colour Transparent | thickness of adhesive：0.018~0.025 | The adhesive rolling distance of corresponding steel balls is less than 10cm | 8↑ | 0.6↑ |
base material： 0.025/0.05/0.075/0.1 | ||||
White | thickness of adhesive：0.018~0.025 | The adhesive rolling distance of corresponding steel balls is less than 10cm | 8↑ | 0.6↑ |
base material： 0.025/0.05/0.075/0.1 | ||||
One side is black, the other side is white | thickness of adhesive：0.018~0.025 | The adhesive rolling distance of corresponding steel balls is less than 10cm | 8↑ | 1.1↑ |
base material： 0.025 |
Note: (1) metal DOME substrate: SUS301;(2) vertex: down Dimple
project | positioning hole to positioning hole(mm) | Positioning hole to shape(mm) | Shape to shape(mm) | Hole diameter(mm) | Positioning hole to metal dome(mm) | metal dome to metal dome(mm) |
sample | ||||||
Manual sample | ±0.15 | ±0.15 | ±0.15 | ±0.1 | ±0.2 | ±0.2 |
Mould sample | ±0.1 | ±0.1 | ±0.1 | +0.08/-0 | ±0.12 | ±0.12 |
Note:
(1) the positioning hole are minimum aperture Φ 1.0 mm;
(2) the minimum aperture of SP sheet is 0.15mm larger than that of shrapnel.The width of gas groove of SP sheet is 1.0~1.2mm, and the wiring mode is: two to three keys are connected, and avoid components to avoid dust.
4. The sample delivery
sample
Model | The new model(5~20pcs) | The old model(5~20pcs) |
Manual sample | 3 ~ 5 working days | 3 ~ 5 working days |
Mould sample | 1 working day after the mold returns | 2 ~ 3 working days |
Mold delivery time: 6 - 7 working days
Note:
1. The life test conditions are as follows: the plastic flat head of the hitting head;Diameter: Φ 1.8;Speed: 2~3 times/second;Strike power: 400-500g.
2. Determination of life span: before and after the life span impact, the change rate of elasticity and feel of the DOME is less than 30%, and the metal dome is not broken.
