TEL:+86-18928282552  E-mail: lhx@dongchengdg.com
Blog

loading

Metal Dome Mix Stick | Dongchen

Metal Dome:
Metal Dome is made of one or more pieces of Metal shrapnel attached to a piece of PET that you can tear off directly from the release film and attach very firmly to your product.This method of assembly is easy to install, low cost, low contact resistance, anti-oxidation and wear resistance, high life, and can replace the light touch switch.
Metal Dome can be customized according to customer product requirements, It can be attached to PCB or silicone.There are two common structures.
Availability:
sharethis sharing button

Metal Dome:

Metal Dome is made of one or more pieces of Metal shrapnel attached to a piece of PET that you can tear off directly from the release film and attach very firmly to your product.This method of assembly is easy to install, low cost, low contact resistance, anti-oxidation and wear resistance, high life, and can replace the light touch switch.

Metal Dome  can be customized according to customer product requirements, It can be attached to PCB or silicone.There are two common structures.


Structure One: double-layer structure adhesive conductive film

MYLAR + SPACER + DOME + Protect film

图片1


1. Mylar

2. Spacer

3. Metal Dome

4. Protect film 


This is a commonly used double-layer structure, which is directly attached to the PCB.The top layer is Mylar, and the bottom is Spacer.Mylar is completely overlaid on Spacer, with the purpose of preventing external dust from entering the operating space and thus stabilizing the conductivity of the conductive film.

On Spacer, there is usually an air-tight design between the domes, with blowhole exhaust and slot exhaust.To increase the feel and prolong the life of the role.

5. Structure Two : Rubber adhesive conductive film

6. RUBBER + MYLAR + SPACER + DOME + Protect film

图片2


1.Rubber (Double-sided adhesive)

2.Mylar

3.Spacer

4.Metal Dome

5.Product film 


Rubber conductive film is stick rubber on MYLAR of double conductive film. Therefore, it can be firmly attached to the Keypad and not easy to tear off.  It is also called  as  onconductive film. 

dimensional tolerance

project/

positioning hole to positioning hole(mm)

Positioning hole to shape(mm)

Shape to shape(mm)

Hole diameter(mm)

Positioning hole to metal dome(mm)

metal dome to metal dome(mm)

sample

Manual sample

±0.15

±0.15

±0.15

±0.1

±0.2

±0.2

Mould sample

±0.1

±0.1

±0.1

+0.08/-0

±0.12

±0.12


2. Product delivery

Manual sample: 3 to 5 working days

Mold sample: 3 working days after the return of the mold



Previous: 
Next: 

CONTACT

  (+86)-18928282552
  lhx@dongchengdg.com
    Dongcheng Huimei Technology Park,
Chashan Town, Dongguan, Guangdong, 
China

Contact Us Now!

Dongguan dongchen electronics.,LTD  All rights reserved     Technical Support:Molan Network