Diffusion film + LGF
Diffusion film, which plays the role of optical diffusion in the product. The light passing through the diffusion layer with PET as the base material will pass through the medium with different refractive index, so that the light will have a lot of refraction, reflection and scattering phenomena, which can correct the light into a uniform surface light source to achieve the optical diffusion effect.
Black foam + glue + shading film + diffusion film + LGF + water glue + cover layer + spacer layer + metal dome layer + protective film layer
(UV)RU glue+ shading film + diffusion film +LGF+ water glue + covering layer + spacer layer + metal dome layer + protective film layer
1. (UV)RUBBER
2-1. diffusion film
2-2. Shading film(Black and white fingerprint adhesive）
3. LGF(PC)
4. (3M7533)
5. (Mylar)
6. (Spacer)
7. (Metal Dome)
8. protective film
Light Guide Film For Sale Specification:
Diffusion film: the thickness is generally 0.09mm and 0.1mm, the size can be customized;Total optical transmittance.
1. Optical PC: common thickness of 0.125mm, light transmittance of >90%
2. Water glue: 3M7533
project | thickness(mm) | initial force | retentivity(hr/kg*inch) | adhesive force(kgf/inch) |
Detection Tool | thickness gauge | Tape initial viscosity tester | Supplier supply | Supplier supply |
Colour Transparent | thickness of adhesive：0.018~0.025 | The adhesive rolling distance of corresponding steel balls is less than 10cm | 8↑ | 0.6↑ |
base material： 0.025/0.05/0.075/0.1 | ||||
White | thickness of adhesive：0.018~0.025 | The adhesive rolling distance of corresponding steel balls is less than 10cm | 8↑ | 0.6↑ |
base material： 0.025/0.05/0.075/0.1 | ||||
One side is black, the other side is white | thickness of adhesive：0.018~0.025 | The adhesive rolling distance of corresponding steel balls is less than 10cm | 8↑ | 1.1↑ |
base material： 0.025 |
Note: (1) metal DOME substrate: SUS301;(2) vertex: down Dimple
project | positioning hole to positioning hole(mm) | Positioning hole to shape(mm) | Shape to shape(mm) | Hole diameter(mm) | Positioning hole to metal dome(mm) | metal dome to metal dome(mm) |
sample | ||||||
Manual sample | ±0.15 | ±0.15 | ±0.15 | ±0.1 | ±0.2 | ±0.2 |
Mould sample | ±0.1 | ±0.1 | ±0.1 | +0.08/-0 | ±0.12 | ±0.12 |
Note: (1) the positioning hole are minimum aperture Φ 1.0 mm;
(2) the minimum aperture of SP sheet is 0.15mm larger than that of shrapnel.The width of gas groove of SP sheet is 1.0~1.2mm, and the wiring mode is: two to three keys are connected, and avoid components to avoid dust.
4. The sample delivery
sample
Model | The new model(5~20pcs) | The old model(5~20pcs) |
Manual sample | 3 ~ 5 working days | 3 ~ 5 working days |
Mould sample | 1 working day after the mold returns | 2 ~ 3 working days |
Mold delivery time: 6-7 working days
Note: 1. The life test conditions are as follows: the plastic flat head of the hitting head;Diameter: Φ 1.8;Speed: 2~3 times/second;Strike power: 400-500g.
2. Determination of life span: before and after the life span impact, the change rate of elasticity and feel of the DOME is less than 30%, and the metal dome is not broken.
Diffusion film + LGF
Diffusion film, which plays the role of optical diffusion in the product. The light passing through the diffusion layer with PET as the base material will pass through the medium with different refractive index, so that the light will have a lot of refraction, reflection and scattering phenomena, which can correct the light into a uniform surface light source to achieve the optical diffusion effect.
Black foam + glue + shading film + diffusion film + LGF + water glue + cover layer + spacer layer + metal dome layer + protective film layer
(UV)RU glue+ shading film + diffusion film +LGF+ water glue + covering layer + spacer layer + metal dome layer + protective film layer
1. (UV)RUBBER
2-1. diffusion film
2-2. Shading film(Black and white fingerprint adhesive）
3. LGF(PC)
4. (3M7533)
5. (Mylar)
6. (Spacer)
7. (Metal Dome)
8. protective film
Light Guide Film For Sale Specification:
Diffusion film: the thickness is generally 0.09mm and 0.1mm, the size can be customized;Total optical transmittance.
1. Optical PC: common thickness of 0.125mm, light transmittance of >90%
2. Water glue: 3M7533
project | thickness(mm) | initial force | retentivity(hr/kg*inch) | adhesive force(kgf/inch) |
Detection Tool | thickness gauge | Tape initial viscosity tester | Supplier supply | Supplier supply |
Colour Transparent | thickness of adhesive：0.018~0.025 | The adhesive rolling distance of corresponding steel balls is less than 10cm | 8↑ | 0.6↑ |
base material： 0.025/0.05/0.075/0.1 | ||||
White | thickness of adhesive：0.018~0.025 | The adhesive rolling distance of corresponding steel balls is less than 10cm | 8↑ | 0.6↑ |
base material： 0.025/0.05/0.075/0.1 | ||||
One side is black, the other side is white | thickness of adhesive：0.018~0.025 | The adhesive rolling distance of corresponding steel balls is less than 10cm | 8↑ | 1.1↑ |
base material： 0.025 |
Note: (1) metal DOME substrate: SUS301;(2) vertex: down Dimple
project | positioning hole to positioning hole(mm) | Positioning hole to shape(mm) | Shape to shape(mm) | Hole diameter(mm) | Positioning hole to metal dome(mm) | metal dome to metal dome(mm) |
sample | ||||||
Manual sample | ±0.15 | ±0.15 | ±0.15 | ±0.1 | ±0.2 | ±0.2 |
Mould sample | ±0.1 | ±0.1 | ±0.1 | +0.08/-0 | ±0.12 | ±0.12 |
Note: (1) the positioning hole are minimum aperture Φ 1.0 mm;
(2) the minimum aperture of SP sheet is 0.15mm larger than that of shrapnel.The width of gas groove of SP sheet is 1.0~1.2mm, and the wiring mode is: two to three keys are connected, and avoid components to avoid dust.
4. The sample delivery
sample
Model | The new model(5~20pcs) | The old model(5~20pcs) |
Manual sample | 3 ~ 5 working days | 3 ~ 5 working days |
Mould sample | 1 working day after the mold returns | 2 ~ 3 working days |
Mold delivery time: 6-7 working days
Note: 1. The life test conditions are as follows: the plastic flat head of the hitting head;Diameter: Φ 1.8;Speed: 2~3 times/second;Strike power: 400-500g.
2. Determination of life span: before and after the life span impact, the change rate of elasticity and feel of the DOME is less than 30%, and the metal dome is not broken.
