TEL:+86-18928282552  E-mail: lhx@dongchengdg.com
Blog

loading

4mm oblong shape metal dome array

Metal Dome is made of one or more pieces of Metal shrapnel attached to a piece of PET that you can tear off directly from the release film and attach very firmly to your product.This method of assembly is easy to install, low cost, low contact resistance, anti-oxidation and wear resistance, high life, and can replace the light touch switch.
Metal Dome can be customized according to customer product requirements, It can be attached to PCB or silicone.There are two common structures.
Availability:
sharethis sharing button


4mm oblong shape metal dome array
4mm oblong shape metal dome array 图二


Structure One: double-layer structure adhesive conductive film

MYLAR + SPACER + DOME + 

1

1.Mylar 

2.Spacer 

3.Metal Dome 

4.Product film 

This is a commonly used double-layer structure, which is directly attached to the PCB.The top layer is Mylar, and the bottom is Spacer.Mylar is completely overlaid on Spacer, with the purpose of preventing external dust from entering the operating space and thus stabilizing the conductivity of the conductive film.

On Spacer, there is usually an air-tight design between the domes, with blowhole exhaust and slot exhaust.To increase the feel and prolong the life of the role.


Structure Two : Rubber adhesive conductive film

RUBBER + MYLAR + SPACER + DOME + Protect film

2

1.Rubber (Double-sided adhesive)

2.Mylar

3.Spacer

4.Metal Dome

5.Product film 

Rubber conductive film is stick rubber on MYLAR of double conductive film. Therefore, it can be firmly attached to the Keypad and not easy to tear off.  It is also called as  stick   conductive film. 



Product Specification 

Total Thickness of Glue: 0.28-0.45mm

Project\Glue Thickness (mm) Initial force  Retentivity (hr/kg*inch)          Adhesion (kgf/inch)
Rubber 0.125 10cm            
Adhesive rolling distance of the corresponding model steel ball is less than 10cm
24↑
(Silica gel and synthetic resin)
0.8↑(Silica gel)
1.0↑ synthetic resin)
clear Thickness of adhesive  :0.025~0.05  Adhesive rolling distance of the corresponding model steel ball is less than 10cm 8↑ 0.6↑
Base material :
0.025/0.05/0.075/0.1
white   Thickness of adhesive:0.025~0.05 Adhesive rolling distance of the corresponding model steel ball is less than 10cm 8↑ 0.6↑
Base material : 0.025/0.05/0.075/0.1
black   Thickness of adhesive:0.025~0.05  Adhesive rolling distance of the corresponding model steel ball is less than 10cm 8↑ 0.6↑
Base material : 0.025/0.05/0.075/0.1

2. Specifications of shrapnel: round, waist, triangle, four-angle shrapnel, etc

3. Dimensional tolerance: ± 0.05- ± 0.15mm

4. Operating temperature: -40 ℃ -85 ℃

5. Operating humidity: below 100% RH

Previous: 
Next: 

CONTACT

  (+86)-18928282552
  lhx@dongchengdg.com
    Dongcheng Huimei Technology Park,
Chashan Town, Dongguan, Guangdong, 
China

Contact Us Now!

Dongguan dongchen electronics.,LTD  All rights reserved     Technical Support:Molan Network